Skip to main content

Loadbalancer Configuration

Warning

We are currently working on making the setup and upgrade process to Automate HA a seamless experience. If you are already using Chef Automate HA, or are planning to use it, please contact your customer success manager or account manager for more information.

This guide will show you how to configure a load balancer for Chef Automate and Chef Infra Server. Below are some examples of load balancer setups.

Load Balancer Setup Examples

  • Using NGINX
  • Using HA Proxy

Load Balancer Prerequisites

  • Before proceeding with the load balancer setup, you must configure DNS for Automate and Chef Server. In this guide, we assume that you have already set up DNS with the following domain names:

    • Chef Automate: chefautomate.example.com
    • Chef Infra Server: chefinfraserver.example.com

Load Balancer architecture

There are two recommended load balancer setups for Automate, depending on your feasibility:

  • Option 1: 2 Load Balancers with 2 Private IPs Each

    • This setup requires two identical load balancer nodes to ensure high availability.
    • Each node needs two private IPs, one for Automate and another for Chef Server.
    • To set up DNS, point the Chef Automate DNS (chefautomate.example.com) to Private IP 1 of both nodes, and the Chef Server DNS (chefinfraserver.example.com) to Private IP 2 of both nodes.

  • Option 2: 4 Load Balancers, separate for Automate and separate for Chef Server

    • This setup requires two load balancers for Automate and two for Chef Server to ensure high availability.
    • Each node only requires one private IP.
    • To set up DNS, point the Chef Automate DNS (chefautomate.example.com) to the Automate nodes and the Chef Server DNS (chefinfraserver.example.com) to the Chef Server nodes.

With these load balancer setups, you can ensure high availability for Chef Automate and Chef Infra Server.

2 Load Balancer Setup with two private IPs each

Load Balancer setup using NGINX

Install Nginx on all Load Balancers

For Debian / Ubuntu :

sudo apt-get update
sudo apt-get install nginx

For Centos or Redhat :

sudo yum install epel-release
sudo yum update
sudo yum install nginx

Configure

  1. Create a new file /etc/nginx/sites-available/chef-automate-lb.conf

    upstream chef-automate-servers {
   # Add a list of automate machine IP addresses.
   server 10.1.0.101:443 max_fails=2 fail_timeout=30s;
   server 10.1.0.102:443 max_fails=2 fail_timeout=30s;
   server 10.1.0.103:443 max_fails=2 fail_timeout=30s;
}

# The below section is used for HTTPS call
server {
   # Add the private IP that's connected to Automate DNS, like 10.1.1.194:443 
   listen <PRIVATE-IP-AUTOMATE>:443 ssl;
   # You need to get your own automate DNS,
   # Here, we have taken an example DNS: chefautomate.example.com
   server_name chefautomate.example.com;
   # Generate SSL certificates and give the path of the certificate and key file.
   # If you want to use letsencript certificates, you can use the certBot
   # This URL is an example for ubuntu machine reference: https://certbot.eff.org/instructions?ws=nginx&os=ubuntufocal
   ssl_certificate /etc/letsencrypt/live/chefautomate.example.com/fullchain.pem;
   ssl_certificate_key /etc/letsencrypt/live/chefautomate.example.com/privkey.pem;
   ssl_protocols TLSv1 TLSv1.1 TLSv1.2;

   location / {
      proxy_pass https://chef-automate-servers;
      proxy_set_header Host $host;
   }
}

# The below section is used for HTTP calls
server {
   listen 80;
   server_name chefautomate.example.com;
   return 301 https://$server_name$request_uri;
}

  2. Create a new file /etc/nginx/sites-available/chef-infra-server-lb.conf

    upstream chef-infra-servers {
   # Add a list of infra server machine API addresses.
   server 10.1.0.101:443 max_fails=2 fail_timeout=30s;
   server 10.1.0.102:443 max_fails=2 fail_timeout=30s;
   server 10.1.0.103:443 max_fails=2 fail_timeout=30s;
}

# The below section is used for HTTPS call
server {
   # Add the private IP that's connected to Chef Server DNS, like 10.1.1.67:443 
   listen <PRIVATE-IP-CHEF-SERVER>:443 ssl;
   # You need to get your infra server DNS,
   # Here, we have taken an example DNS: chefinfraserver.example.com
   server_name chefinfraserver.example.com;
   # Generate SSL certificates and give the path of the certificate and key file.
   # If you want to use letsencript certificates, you can use the certBot
   # This URL is an example for ubuntu machine reference: https://certbot.eff.org/instructions?ws=nginx&os=ubuntufocal
   ssl_certificate /etc/letsencrypt/live/chefinfraserver.example.com/fullchain.pem;
   ssl_certificate_key /etc/letsencrypt/live/chefinfraserver.example.com/privkey.pem;
   ssl_protocols TLSv1 TLSv1.1 TLSv1.2;

   location / {
      proxy_pass https://chef-infra-servers;
      proxy_set_header Host $host;
   }
}

# The below section is used for HTTP calls
server {
   listen 80;
   server_name chefinfraserver.example.com;
   return 301 https://$server_name$request_uri;
}

  3. Enable Sites for Chef Automate and Chef Infra Server

    sudo ln -s /etc/nginx/sites-available/chef-automate-lb.conf /etc/nginx/sites-enabled/
sudo ln -s /etc/nginx/sites-available/chef-infra-server-lb.conf /etc/nginx/sites-enabled/

  4. Test Nginx Config

    sudo nginx -t

  5. Restart Nginx

    sudo systemctl restart nginx

Load Balancer setup using HA Proxy

Install HA Proxy on all Load Balancers

For Debian / Ubuntu :

sudo apt-get update
sudo apt install haproxy

For Centos or Redhat :

sudo yum install epel-release
sudo yum update
sudo yum install haproxy

Configure

  1. HAProxy needs an SSL certificate to be one file in a specific format. To do that, we create a new directory with the SSL certificate for Chef Automate and Infra Server that HAProxy reads will live. Then we output the “live” (latest) certificates from LetsEncrypt and dump that output into the certificate file for HAProxy to use:

    • For Chef Automate:

      sudo mkdir -p /etc/ssl/chefautomate.example.com

sudo cat /etc/letsencrypt/live/chefautomate.example.com/fullchain.pem \
   /etc/letsencrypt/live/chefautomate.example.com/privkey.pem \
   | sudo tee /etc/ssl/chefautomate.example.com/chefautomate.example.com.pem

    • For Chef Infra Server:

      sudo mkdir -p /etc/ssl/chefinfraserver.example.com

sudo cat /etc/letsencrypt/live/chefinfraserver.example.com/fullchain.pem \
   /etc/letsencrypt/live/chefinfraserver.example.com/privkey.pem \
   | sudo tee /etc/ssl/chefinfraserver.example.com/chefinfraserver.example.com.pem

  2. Once HA Proxy is installed, add the following to the configuration file at /etc/haproxy/haproxy.cfg. This will set the load balancer config for Chef Automate and Chef Infra Server.

    # The below section is used for HTTP calls
frontend fe_a2ha_http
   mode http
   bind *:80
   redirect scheme https code 301 if !{ ssl_fc }

# You need to get your own Automate DNS and Chef Server,
# Here, we have taken example DNS: chefautomate.example.com and chefinfraserver.example.com
# Generate SSL certificates and give the path of the certificate and key file.
# If you want to use letsencript certificates, you can use the certBot
# This url is an example for ubuntu machine reference: https://certbot.eff.org/instructions?ws=nginx&os=ubuntufocal

frontend chef-automate-servers
   # Add the private IP thats connected to Automate DNS, like 10.1.1.194:443 
   bind <PRIVATE-IP-AUTOMATE>:443 ssl crt /etc/ssl/chefautomate.example.com/chefautomate.example.com.pem
   mode http
   default_backend chef-automate-servers

frontend chef-infra-servers
   # Add the private IP thats connected to Chef Server DNS, like 10.1.1.67:443 
   bind <PRIVATE-IP-CHEF-SERVER>:443 ssl crt /etc/ssl/chefinfraserver.example.com/chefinfraserver.example.com.pem
   mode http
   default_backend chef-infra-servers

backend chef-automate-servers
   mode http
   balance roundrobin
   # Add a list of automate machine ip addresses.
   server automate1 10.1.0.101:443 check ssl verify none
   server automate2 10.1.0.102:443 check ssl verify none
   server automate3 10.1.0.103:443 check ssl verify none

backend chef-infra-servers
   mode http
   balance roundrobin
   # Add a list of infra server machine ip addresses.
   server infra1 10.1.0.101:443 check ssl verify none
   server infra2 10.1.0.102:443 check ssl verify none
   server infra3 10.1.0.103:443 check ssl verify none

  3. Test HA Proxy Config

    sudo haproxy -c -f /etc/haproxy/haproxy.cfg

  4. Restart HA Proxy

    sudo systemctl restart haproxy

4 Load Balancers Setup, separate for Automate and separate for Chef Server

Load Balancer setup using NGINX

Install Nginx on all the Load Balancers

For Debian / Ubuntu :

sudo apt-get update
sudo apt-get install nginx

For Centos or Redhat :

sudo yum install epel-release
sudo yum update
sudo yum install nginx

Configure these on Automate Load Balancers

  1. Create a new file /etc/nginx/sites-available/chef-automate-lb.conf

    upstream chef-automate-servers {
   # Add a list of automate machine IP addresses.
   server 10.1.0.101:443 max_fails=2 fail_timeout=30s;
   server 10.1.0.102:443 max_fails=2 fail_timeout=30s;
   server 10.1.0.103:443 max_fails=2 fail_timeout=30s;
}

# The below section is used for HTTPS calls
server {
   listen 443 ssl;
   # You need to get your own automate DNS,
   # Here, we have taken an example DNS: chefautomate.example.com
   server_name chefautomate.example.com;
   # Generate SSL certificates and give the path of the certificate and key file.
   # If you want to use letsencript certificates, you can use the certBot
   # This URL is an example for ubuntu machine reference: https://certbot.eff.org/instructions?ws=nginx&os=ubuntufocal
   ssl_certificate /etc/letsencrypt/live/chefautomate.example.com/fullchain.pem;
   ssl_certificate_key /etc/letsencrypt/live/chefautomate.example.com/privkey.pem;
   ssl_protocols TLSv1 TLSv1.1 TLSv1.2;

   location / {
      proxy_pass https://chef-automate-servers;
      proxy_set_header Host $host;
   }
}

# The below section is used for HTTP calls
server {
   listen 80;
   server_name chefautomate.example.com;
   return 301 https://$server_name$request_uri;
}

  2. Enable Sites for Chef Automate

    sudo ln -s /etc/nginx/sites-available/chef-automate-lb.conf /etc/nginx/sites-enabled/

  3. Test Nginx Config

    sudo nginx -t

  4. Restart Nginx

    sudo systemctl restart nginx

Configure these on Chef Server Load Balancers

  1. Create a new file /etc/nginx/sites-available/chef-infra-server-lb.conf

    upstream chef-infra-servers {
   # Add a list of infra server machine IP addresses.
   server 10.1.0.101:443 max_fails=2 fail_timeout=30s;
   server 10.1.0.102:443 max_fails=2 fail_timeout=30s;
   server 10.1.0.103:443 max_fails=2 fail_timeout=30s;
}

# The below section is used for HTTPS calls
server {
   listen 443 ssl;
   # You need to get your own infra server DNS,
   # Here, we have taken an example DNS: chefinfraserver.example.com
   server_name chefinfraserver.example.com;
   # Generate SSL certificates and give the path of the certificate and key file.
   # If you want to use letsencript certificates, you can use the certBot
   # This URL is an example for ubuntu machine reference: https://certbot.eff.org/instructions?ws=nginx&os=ubuntufocal
   ssl_certificate /etc/letsencrypt/live/chefinfraserver.example.com/fullchain.pem;
   ssl_certificate_key /etc/letsencrypt/live/chefinfraserver.example.com/privkey.pem;
   ssl_protocols TLSv1 TLSv1.1 TLSv1.2;

   location / {
      proxy_pass https://chef-infra-servers;
      proxy_set_header Host $host;
   }
}

# The below section is used for HTTP calls
server {
   listen 80;
   server_name chefinfraserver.example.com;
   return 301 https://$server_name$request_uri;
}

  2. Enable Sites for Chef Automate and Chef Infra Server

    sudo ln -s /etc/nginx/sites-available/chef-infra-server-lb.conf /etc/nginx/sites-enabled/

  3. Test Nginx Config

    sudo nginx -t

  4. Restart Nginx

    sudo systemctl restart nginx

Load Balancer setup using HA Proxy

Install HA Proxy on all Load Balancers

For Debian / Ubuntu :

sudo apt-get update
sudo apt install haproxy

For Centos or Redhat :

sudo yum install epel-release
sudo yum update
sudo yum install haproxy

Configure on Automate Load Balancers

  1. HAProxy needs an SSL certificate to be one file in a specific format. To do that, we create a new directory with the SSL certificate for Automate that HAProxy reads will live. Then we output the “live” (latest) certificates from LetsEncrypt and dump that output into the certificate file for HAProxy to use:

    • For Chef Automate:

      sudo mkdir -p /etc/ssl/chefautomate.example.com

sudo cat /etc/letsencrypt/live/chefautomate.example.com/fullchain.pem \
   /etc/letsencrypt/live/chefautomate.example.com/privkey.pem \
   | sudo tee /etc/ssl/chefautomate.example.com/chefautomate.example.com.pem

  2. Once HA Proxy is installed, add the following to the configuration file present at /etc/haproxy/haproxy.cfg. This will set the load balancer config for Chef Automate.

    # The below section is used for HTTP calls
frontend fe_a2ha_http
   mode http
   bind *:80
   redirect scheme https code 301 if !{ ssl_fc }

# You need to get your own automate DNS,
# Here we have taken an example DNS: chefautomate.example.com
# Generate SSL certificates and give the path of the certificate and key file.
# If you want to use letsencript certificates, you can use the certBot
# This URL is an example for ubuntu machine reference: https://certbot.eff.org/instructions?ws=nginx&os=ubuntufocal

frontend chef-automate-servers
   bind *:443 ssl crt /etc/ssl/chefautomate.example.com/chefautomate.example.com.pem
   mode http
   default_backend chef-automate-servers

backend chef-automate-servers
   mode http
   balance roundrobin
   # Add a list of automate machine ip addresses.
   server automate1 10.1.0.101:443 check ssl verify none
   server automate2 10.1.0.102:443 check ssl verify none
   server automate3 10.1.0.103:443 check ssl verify none

  3. Test HA Proxy Config

    sudo haproxy -c -f /etc/haproxy/haproxy.cfg

  4. Restart HA Proxy

    sudo systemctl restart haproxy

Configure on Chef Server Load Balancers

  1. HAProxy needs an SSL certificate to be one file in a specific format. To do that, we create a new directory with the SSL certificate for Infra Server that HAProxy reads will live. Then we output the “live” (latest) certificates from LetsEncrypt and dump that output into the certificate file for HAProxy to use:

    • For Chef Infra Server:

      sudo mkdir -p /etc/ssl/chefinfraserver.example.com

sudo cat /etc/letsencrypt/live/chefinfraserver.example.com/fullchain.pem \
   /etc/letsencrypt/live/chefinfraserver.example.com/privkey.pem \
   | sudo tee /etc/ssl/chefinfraserver.example.com/chefinfraserver.example.com.pem

  2. Once HA Proxy is installed, add the following to the configuration file present at /etc/haproxy/haproxy.cfg. This will set the load balancer config for Chef Infra Server.

    # The below section is used for HTTP calls
frontend fe_a2ha_http
   mode http
   bind *:80
   redirect scheme https code 301 if !{ ssl_fc }

# You need to get your own Chef Server DNS,
# Here we have taken an example DNS: chefinfraserver.example.com
# Generate SSL certificates and give the path of the certificate and key file.
# If you want to use letsencript certificates, you can use the certBot
# This url is an example for ubuntu machine reference: https://certbot.eff.org/instructions?ws=nginx&os=ubuntufocal

frontend chef-infra-servers
   bind *:443 ssl crt /etc/ssl/chefinfraserver.example.com/chefinfraserver.example.com.pem
   mode http
   default_backend chef-infra-servers

backend chef-infra-servers
   mode http
   balance roundrobin
   # Add a list of infra server machine ip addresses.
   server infra1 10.1.0.101:443 check ssl verify none
   server infra2 10.1.0.102:443 check ssl verify none
   server infra3 10.1.0.103:443 check ssl verify none

  3. Test HA Proxy Config

    sudo haproxy -c -f /etc/haproxy/haproxy.cfg

  4. Restart HA Proxy

    sudo systemctl restart haproxy
Edit this page on GitHub.

Thank you for your feedback!

×









Search Results